Home About us Products Quality Control Tech Info Contact us
HomePage » PRODUCTS » Wall mounted ultrasonic flow meter » Insertion type flow meter » Insertion type flow meter <<      >>  
 
Description:

ABTDS-100C: Fixed type Insertion type
Transit-Time Ultrasonic Flowmeter

- State-of-the-art Transit-time technology

Low cost, good performance

Features:
(1).Very good long-term stability and reliability
(2).No flow disturbance. No moving parts, no pressure drop.
(3).Wide flow range 0.03 to 105ft/s
(4).Suitable for all commonly used pipe materials
(5).High accuracy (better than ±1%, and could reach to ±0.5% with calibration)
(6).High quality signal. Robust performance
(7).Flexible installation. Easy to remove transducer
(8).GPRS / GSM networking capability with certain model
(9).For pipe size 3" (DN80) or larger
(10).Ideal for both clean and opaque liquid flow measurements

Descriptions:
Insertion type ultrasonic flow meter employs a pair of insertion-type ultrasonic transducers to measure the flow by inserting the transducers into the pipe wall. The transducers do not extrude into the flow, thus, do not generate any disturbance or pressure drop to the flow. Comparing with clamp-on installation, the insertion type has advantage of long-term stability and better accuracy.
Comparing with a clamp-on flowmeter, the biggest advantages of our wetted-type flowmeter are its long-term stability, better signal quality and less installation uncertainty. The last two features can also be translated into higher accuracy.
Comparing with a clamp-on flowmeter, the biggest advantages of our wetted-type flowmeter are its long-term stability, better signal quality and less installation uncertainty. The last two features can also be translated into higher accuracy.
Insertion type flow meter is designed for pipe larger than 3” (DN80mm). For smaller pipe, our spool-piece model, flow cell type flow meter, might be a better choice. When pipe size becomes smaller, the cost of a spool-piece transducer comes down.
The Insertion type flow meter is ideal for flow surveys and closed-pipe applications, such as normal water flow measurement (hot/chill water, city water, sea water), sewage and sludge measurement, and measurements of oil (crude/diesel/fuel), chemicals (alcohol, acids, etc.), beverage, and many other liquids.

Specifications:

The same main conversion unit is used, so technical specification is almost the same as that of clamp-on type except transducer type. For detailed specification,please kindly check the link: product-id-5.html

Optional transducers:(For pipe size>80mm)

For samller pipe, we recommend to choose spool piece or flow cell type ultrasonic flow meter. Abtsd-100G

Vertical type insertion transducer

For pipe size 3" (DN80) or larger

Medium temp.:-40C -160C

Installing space>550mm

Insertion type for cement pipes

For pipe size 3" (DN80) or larger

Medium temp.:-40C -160C

Installing space>700mm


The main conversion unit is available as below:

Back>>